PPG INDUSTRIES INC -- LOW VOC REDUCER MEDIUM, DT1875  -- 8010-00N053694
<pre>=====================  Product Identification  =====================

Product ID:LOW VOC REDUCER MEDIUM, DT1875
MSDS Date:03/23/1992
FSC:8010
NIIN:00N053694
=== Responsible Party ===
Company Name:PPG INDUSTRIES INC
Address:4325 ROSANNA DR
City:ALLISON PARK
State:PA
ZIP:15101
Country:US
Info Phone Num:800-441-9695
Emergency Phone Num:304-843-1300
CAGE:47695
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC
Address:ONE PPG PLACE
Box:City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Phone:1-800-245-2974 (CAL HYPO)
CAGE:47695

=============  Composition/Information on Ingredients  =============

Ingred Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:10F,-12C
Lower Limits:1.1%
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
    CHEM/UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA
    CLASS(SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
    WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
    CNTNRS TO PVNT PRESS BUILD-UP & POSS(SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
    HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
    EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

=============  Exposure Controls/Personal Protection  =============

Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>136F,>58C
Vapor Pres:82.1
Vapor Density:HVR/AIR
Spec Gravity:0.75
Evaporation Rate &amp; Reference:572 (BUOAC=100)
Solubility in Water:10%
Appearance and Odor:NON-VISCOUS LIQUID W/ODOR CHARACTERISTIC OF
    SOLVENTS LISTED IN INGREDIENTS.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
    OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.