CHEMTECH INDUSTRIES, INC -- RUBBER SOLVENT  -- 6810-00-227-1302
<pre>=====================  Product Identification  =====================

Product ID:RUBBER SOLVENT
MSDS Date:01/01/1987
FSC:6810
NIIN:00-227-1302
=== Responsible Party ===
Company Name:CHEMTECH INDUSTRIES, INC
Address:1655 DES PERES RD
Box:31000
City:ST. LOUIS
State:MO
ZIP:63131-1821
Country:US
Emergency Phone Num:NONE KNOWN
CAGE:56894
=== Contractor Identification ===
Company Name:CHEMTECH INDUSTRIES INC MANUFACTURED PRODUCTS DIV
Address:1655 DES PERES RD
Box:31000
City:ST. LOUIS
State:MO
ZIP:63131-1821
Country:US
Phone:314-966-9934
CAGE:56894

=============  Composition/Information on Ingredients  =============

Ingred Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 100%
OSHA PEL:100 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:IRRITATING TO RESPIRATORY TRACT. MAY CAUSE
    DIZZINESS,UNCONSCIOUSNESS,COMA.

=======================  First Aid Measures  =======================

First Aid:EYE-FLUSH WITH WATER & GET MED ATTN. SKIN-FLUSH W/WATER.
    INHAL-GET TO FRESH AIR. IF DISCOMFORT PERSIST,GET MED ATTN.
    INGEST-CALL PHYSICIAN IMMED. DO NOT INDUCE VOMITING.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=-26.5C, -16.F
Lower Limits:1.3
Extinguishing Media:NFPA CLASS B EXTINGUISHER (CO*2 OR FOAM) FOR CLASS
    IB FIRES
Fire Fighting Procedures:USE AIR-SUPPLIED BREAHTING MASKS. WATER MAY
    COOL CLOSED CONT
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HEAT & OPEN FLAME

==================  Accidental Release Measures  ==================

Spill Release Procedures:ISOLATE SPILL.ISOLATE FROM SOURCES OF
    IGNITION. MOP UP & CONTAINERIZE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 29C/120F/. STORE
    LGE AMTS IN STRUCTURES MADE FOR OSHA CLASS IB LIQUIDS. EMPTY
    CONTAINERS HAZARDOUS. CONTINUE ALL LABLE PRECAUTIONS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AS REQD TO KEEP ENVIRONMENT BELOW TLV.
Ventilation:LOCAL EXHAUST PREFERABLE; MECHANICAL-ACCEPTABLE
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:AS REQD TO AVOID PROLONGED CONTACT
Supplemental Safety and Health
MSDS DATED:11/01/83;SPEC:ZZ-T-416 ,CLASSD, TYPE IV

==================  Physical/Chemical Properties  ==================

HCC:F2
NRC/State Lic Num:NOT RELEVANT
Boiling Pt:=61.1C, 142.F
Vapor Pres:128
Vapor Density:3.0
Spec Gravity:0.701
Evaporation Rate &amp; Reference:7.5 (N-BUAC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR,WATER-WHITE LIQUID,MILD,NON-RESIDUAL ODOR
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:CARBON MONOXIDE FROM IN COMPLETE
    BURNING

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE PER LOCAL POLLUTION REGS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.