HALSTEAD INDUSTRIAL PRODUCTS GROUP -- CONTACT ADHESIVE, 77-198  -- 8040-00N021885
<pre>=====================  Product Identification  =====================

Product ID:CONTACT ADHESIVE, 77-198
MSDS Date:11/09/1988
FSC:8040
NIIN:00N021885
=== Responsible Party ===
Company Name:HALSTEAD INDUSTRIAL PRODUCTS GROUP
Address:100 SOUTH ELM ST SUITE 400
City:GREENSBORO
State:NC
ZIP:27401
Country:US
Info Phone Num:919-272-1966
Emergency Phone Num:919-272-1966
CAGE:HALST
=== Contractor Identification ===
Company Name:HALSTEAD INDUSTRIAL PRODUCTS GROUP
Address:300N GREENE STREET, SUITE 400
City:GREENSBORO
State:NC
ZIP:27401
Country:US
Phone:(919) 272-1966
CAGE:HALST

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETONE  (SARA III)
CAS:67-64-1
RTECS #:AL3150000
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:HEXANE (N-HEXANE)
CAS:110-54-3
RTECS #:MN9275000
OSHA PEL:500 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:HEXANE ISOMERS; (C6 ISOMERS OF HEXANE). TLV: 500PPM;
    1000PPM STEL (MFR)
ACGIH TLV:SEE INGREDIENT NAME

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS A DEFATTING AGENT AND
    CAN CAUSE DERMATITIS OR SKIN IRRITATION UPON PROLONGED OR REPEATED
    CONTACT. IT MAY CAUSE IRRITATION OF EYES. SEVERE OVEREXPOSURE MAY
    CAUSE UNCONSCIOUSNESS AND ASP HYXIATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:LIGHTHEADEDNESS, NAUSEA, DIZZINESS, GIDDINESS
    OR BREATHING DIFFICULTIES.
Medical Cond Aggravated by Exposure:CENTRAL AND PERIPHERAL NERVOUS
    SYSTEM; PRE- EXISTING EYE AND SKIN DISORDER.

=======================  First Aid Measures  =======================

First Aid:INHAL: MOVE TO FRESH AIR AT ONCE. IF BREATHING CONTINUES TO
    BE DIFFICULT, ADMINISTER OXYGEN UNTIL MEDICAL ASSISTANCE CAN BE
    RENDERED. EYES: IMMED FLUSH W/POTABLE WATER FOR A MINIMUM OF 15
    MIN, SEEK AS SISTANCE FROM MD . SKIN: FLUSH W/COPIOUS AMOUNTS OF
    WATER. CALL MD . INGEST: CALL MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Lower Limits:1.2%
Upper Limits:13%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, HALON.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COOL DRUMS W/WATER SPRAY TO PREVENT
    PRESSURE EXPLOSION. VAPORS MAY IGNITE EXPLOSIVELY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE AND ELIMINATE ALL SOURCES OF IGNITION.
    VENTILATE AREA OF SPILL OR LEAK. FOR SMALL QUANTITIES, ABSORB ON
    PAPER TOWELS. LARGE QUANTITIES, USE AN ABSORBENT MATERIAL AFTER
    RETAINING BY DIKING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP PRODUCT CONTAINERS COOL, DRY AND
    AWAY FROM SOURCES OF IGNITION. USE AND STORE THIS PRODUCT
    W/ADEQUATE VENTILATION.
Other Precautions:THIS PRODUCT SHLD NOT BE ALLOWED TO ENTER A CONFINED
    SPACE, SUCH AS A SEWER BECAUSE OF THE POSSIBILITY OF VAPOR BUILD-UP
    POSSIBLY ALLOWING AN EXPLOSION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED SELF-CONTAINED AIR SUPPLIED
    OR ORGANIC VAPOR RESPIRATOR IN ACCORDANCE W/29CFR 1910.34 IF
    EXPOSURE EXCEEDS LIMITS.
Ventilation:LOCAL EXHAUST TO REDUCE EXPOSURE BELOW ALLOWABLE LIMITS.
    MECHANICAL (GEN) NOT REQD IF LOC EXHST IS PROVIDED. (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD.
Other Protective Equipment:IMPERVIOUS CLOTHING TO PREVENT REPEATED/
    PROLONGED SKIN CONTACT.
Work Hygienic Practices:WASH HANDS BEFORE EATING, DRINKING, OR USING
    TOILET FACILITIES.
Supplemental Safety and Health
VENT: USE EXPLOSION PROOF MOTOR AND FIXTURES ONLY.

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:131F,55C
Vapor Pres:140 @ 20C
Vapor Density:>1
Spec Gravity:0.812
Evaporation Rate &amp; Reference:>1 (BUTYL ACETATE = 1)
Solubility in Water:PARTIAL
Appearance and Odor:AMBER IN COLOR. SOLVENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS OR ACIDS.
Stability Condition to Avoid:FLAME, SPARK OR EXTREME HEAT.
Hazardous Decomposition Products:CO, CO2, AND HCL.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTAMINATED ABSORBENT MATERIALS OR WASTE
    PRODUCT MUST BE DISPOSED OF I/A/W REGULATIONS IN THE RCRA OR
    FEDERAL, STATE, AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.